Alkyd antiseptic for wooden surfaces


Alkyd antiseptic for protection of wooden surfaces inside and outside the premises.
Intended for treatment lumber, wooden and mineral facades, basements, doors, frames, garden furniture surfaces and elements outside (which do not have direct contact with the water).
Can be used in damp and poorly ventilated premises. After treatment with antiseptic wood can be varnished, painted, glued.

Main characteristics of the product

  • Efficient surface protection against weather impacts;
  • Prevents of fungus, blue stain, mold and wood pests;
  • Antiseptic treatment does not change the color and pattern of wood;
  • Doesn’t contain the compounds of extremely hazardous heavy metals (lead, cadmium, chrome VІ).

Application of the product

Remove particles of old coating and clean the surface from dust, dirt and grease. Greenwood and moisture wood shall be dried-up. Treatment of frozen wood is not allowed!
The surface shall be clean and dry. Mix thoroughly before application. For vertical surfaces it is recommended to apply antiseptic from the bottom up.
After treatment, the surface shall be protected from moisture until the antiseptic is completely dry (at least 24 hours at a temperature of 20 °C).
During the work and afterwards the premises shall be thoroughly ventilated.
Use rubber gloves for hands protection.
Instrument cleaning – dearomatized thinner ТМ Мікs color.
Keep away from fire!

Drying

20 hours

Packaging

0,7 kg; 2,2 kg

Consumption

5-10 m2/ kg for slice wood; 10-15 m2/kg for sawn wood

Consumption calculator