Main characteristics of the product
- Effectively protects wood from mold fungi, insects and other biological damages;
- Able to penetrate deeply into the surface;
- Changes a treated wood to the group of non-flammable materials;
- Has a red color to indicate processing;
- The product is not to be used on surfaces previously covered with oil, paint, varnish, other film-forming or water-repellent materials;
- Economical consumption.
Application of the product
Apply the product on the wooden surface that is cleaned of dirt, dust, bark, bast and other coatings with a brush, roller, spray at an air temperature not lower than + 5ºC, as well as by immersion, soaking or autoclaving. Application by brush, roller, spray is carried out in 2-3 receptions with an interval of 20-40 minutes, providing the specified total consumption. Treatment of frozen wood is not allowed! Do not mix with other compounds. Mix thoroughly before application. Turbidity or a small amount of sediment is allowed.
Drying
After application, the product is completely absorbed by the surface.
Packaging
Plastic canister 5 l and 10 l.
Consumption
The total consumption to ensure fire-retardant properties for group I (heavy wood) – not less than 600 g / m2 (1.6-1.7 m2 / kg); the consumption to ensure fire-retardant properties for group II (flammable wood) and bioprotection – not less than 300 g / m2 (3.0-3.5 m2 / kg).
