Special anticorrosion priming enamel with hammer effect for protection and decoration of metal surfaces inside and outside the premises. Intended for clean and rust surfaces of ferrous- and some non-ferrous metal, exposed to weather impacts and workloads. Recommended for finish coloring of fences, roofs, equipment components, different interior metal elements, wooden, mineral, plastered and other surfaces.
Main characteristics of the product
- 3 in 1:
- rust solvent;
- anticorrosion primer;
- decorative enamel;
- Can be applied on strong rust up to 50 μm;
- Doesn’t need previous priming of metal;
- Contains highly efficient complex of anticorrosion pigments;
- Excellent adhesion to metal surfaces;
- Excellent adhesion to galvanized metal;
- Efficient protection against weather impact and workloads;
- Stands up temperature differences from – 50 °С to +60 °С;
- Easy-to-use, easy application, well-spreaded;
- Doesn’t contain the compounds of extremely hazardous heavy metals (lead, cadmium, chrome VІ).
Application of the product
Clean the surface from brittle rust, old peeling paint, degrease with solvent.
Mix thoroughly and, dilute with Miks color Universal thinner or analogues in the amount of 10% by
weight of primer-enamel for applying with a brush or roller and 10-15% for the pneumatic spraying method. When applying by
pneumatic spraying, it is recommended to keep the paint sprayer at a distance of 15-20 cm from the surface to be painted, use a paint
sprayer with a nozzle diameter of 1.3-1.4 mm and a pressure of 3-3.5 atm.
Apply primer-enamel in at least 2 layers, using pneumatic and airless spraying methods, with a brush or roller at an air
temperature of at least 5°C and relative humidity not higher than 80%. The interval between layers is about 15-25 minutes. After applying
two layers of primer-enamel, the wcoating should be left for 24 hours.
Drying
2 hours (film polymerization)
Packaging
0.65 kg, 2 kg
Consumption
7 – 10 m2/kg, per one-layer coating depending on color and surface type
Shades
