Abrasion- and detergent-resistant alkyd enamel for wooden floors and other interior surfaces. Intended for new and previously painted wooden surfaces (including fiberboards and chipboards) inside the premises. Recommended for painting floors and other interior elements exposed to constant mechanical loads and intensive washing.

Main characteristics of the product

  • resistant to mechanical loads and intensive washing;
  • forms an elastic and durable coating that does not crack over time;
  • intense color;
  • excellent coverage;
  • easy to use, easy to apply, well spread;
  • high adhesion to wooden surfaces;
  • does not contain compounds of highly hazardous heavy metals (lead, cadmium, hexavalent chromium).

Application of the product

Enamel shall be thoroughly mixed and, if necessary, diluted with solvent to application viscosity. For firstly painted surfaces: sand, remove dust and other contaminants. To reduce enamel consumption and achieve a better result, preliminary application of «VL–10» pore filler TM Miks Color is recommended. Enamel shall be applied in two coats with a brush or roller. Drying time of each coat – 24 hours. For renovation of previously painted surfaces: remove particles of old flaked coating, sand and clean the surface. Severely damaged coatings shall be completely removed. During and after application, the premises shall be thoroughly ventilated. Use rubber gloves to protect hands. Instrument cleaning: Universal thinner TM Miks Color. Keep away from fire!

Drying

24 hours (film polymerization)

Packaging

0.9 kg, 2.8 kg

Consumption

5–6 m²/kg per one-layer coating depending on surface type

Consumption calculator

Shades