Special anticorrosion priming enamel for protection and decoration of metal surfaces inside and outside the premises. Intended for clean and rust surfaces of ferrous- and some non-ferrous metal, galvanized metal, exposed to weather impacts and workloads. Recommended for finish coloring of fences, roofs, equipment components, different interior metal elements, wooden, mineral, plastered and other surfaces.

Main characteristics of the product

  • 3 in 1:
    • rust solvent;
    • anticorrosion primer;
    • decorative enamel;
  • Can be applied on strong rust up to 50 μm;
  • Doesn’t need previous priming of metal;
  • Contains highly efficient complex of anticorrosion pigments;
  • Excellent adhesion to metal surfaces;
  • Excellent adhesion to galvanized metal;
  • Efficient protection against weather impact and workloads;
  • Stands up temperature differences from – 50 °С to +60 °С;
  • Easy-to-use, easy application, well-spreaded;
  • Doesn’t contain the compounds of extremely hazardous heavy metals (lead, cadmium, chrome VІ).

Application of the product

Priming enamel shall be thoroughly mixed, and if necessary – thinned with solvent to application viscosity. For firstly-painted surfaces: remove dust, dirt and grease. Can be applied on strong rust up to 50 μm. Priming enamel shall be applied in 2 coats with brush, roller or paint sprayer. Drying time of each coat – 4 hours. For renovation of previously painted surfaces: remove brittle rust, particles of flaked old coating, grind and degrease the surface. Considerably damaged coatings shall be completely removed. During the work and afterwards the premises shall be thoroughly ventilated. Use rubber gloves for hands protection. Instrument cleaning: Мікs color dearomatized thinner. Keep away from fire!

Drying

4 hours (film polymerization)

Packaging

0.8 kg, 2.3 kg, 12 kg, 25 kg

Consumption

7 – 10 m2/kg, per one-layer coating depending on color and surface type

Consumption calculator

Shades