It is used on asphalt concrete, asphalt bituminous, cement concrete and concrete surfaces.
Paint for road marking «Traffic» is certified by DerzhdorNDI SE.
Main characteristics of the product
- High resistance to abrasion;
- Atmospheric resistance;
- Resistance to water, salts, fuel and lubricants.
Application of the product
Clean the surface from dust, dirt, sand and grease.
The surface must be free of pits and deformations, dry and clean. The paint is supplied ready for application. The viscosity of the paint meets the requirements of mechanized application.
If necessary, it is allowed to dilute the paint with “Signo” solvent, ethyl acetate, butyl acetate or their mixture.
Apply at air temperature not lower than 5 ºC, relative air humidity not higher than 80%.
The temperature of the road surface on which the marking is applied should be within (5-45) ºC.
It is not allowed to carry out work in high humidity, during rain, fog or dew.
Apply the paint in 1 layer with a brush, roller or special marking machines.
Allowing dry painted road surface before use – 30-45 minutes, indoor surfaces – 24 hours.
Note:
To ensure the visibility of road markings in the dark, it is recommended to sprinkle the fresh coating with reflective glass balls in the amount of at least 0.3 kg/m2 no later than 5 seconds after applying the paint.
Drying
30 minutes
Packaging
12 kg, 30 kg.
Consumption
1,0 -1,7 m2 /kg on a 0ne-layer coating, depending on the type and condition of the surface
Shades
