Main characteristics
- matte;
- increased resistance to atmospheric influences, mechanical stress, ultraviolet radiation, and temperature changes;
- resistant to intensive washing (Class 1 EN 13300);
- highly elastic, with good adhesion to many surfaces;
- vapour-permeable, resistant to cracking, with low water permeability (EN 1062);
- easy to apply and dries quickly;
Application
Mix thoroughly until homogeneous before use. If necessary, add 5%–15% water depending on the application method. For surfaces being painted for the first time: remove dust and other contaminants, and degrease if necessary. For best results, mineral surfaces should be primed with TM Miks Color universal deep-penetrating primer. Metal surfaces are recommended to be treated with TM Miks Color anti-corrosion primer before painting. Apply the paint evenly in 2–3 coats using a brush, roller, or spray gun, avoiding runs. The intercoat interval is 3 hours. For renovation of previously painted surfaces: remove any flaking old coating, clean the surface from dust and dirt. If there are cracks or damaged areas, level the surface with mineral-based fillers, sand it, remove the dust, and prime it. Use rubber gloves to protect your hands. Clean tools with water and detergent.
Drying time
3 hours
Packaging
1.2 kg; 3.5 kg; 6 kg; 12 kg
Consumption
6–10 m²/kg for a single-coat application, depending on the colour, application method, and surface type.
Colours
