Adhesive priming paint with quartz sandfor processing and strengthening of cement-lime, lime and gypsum plasters, the
prepared concrete, gypsum cardboard, MDF, particleboard, fiberboard and OSB before applying plasters, putties, including decorative, structural paints indoors and outdoors.
Main characteristics of the product
- Good adhesion to mineral surfaces;
- It is used as an intermediate/finish layer before applying inrerior paints and decorative effects;
- Contains quartz sand
Applying
New, fresh lime-cement-based surfaces should be maintained for 4 weeks before applying the paint. Concrete blocks can be primed after one heating season. The treated surface must be strong and dry.
Carefully remove flaky parts of the coating, clean from dust, dirt, efflorescence, oil stains and other substances that reduce adhesion. Remove chalk whitewash and lime paint, then rinse the surface with water. If necessary,
level the surface with a putty suitable for this surface. Then grind, remove dust from grinding. In rooms with high humidity, it is recommended to pre-treat the surface with MIKS color universal concentrated antiseptic to protect from mold and fungus. Before painting, the surface must be primed with MIKS color universal impregnation.
Adhesive priming paint is a ready-to-use product. Mix thoroughly before application and stir periodically during operation.
Apply with a brush or roller in 1 layer.
Use rubber gloves to protect your hands. Cleaning the tools – water with the detergent.
Drying
5 hours
Packaging
2 l, 5 l, 10 l
Coverage
2 – 3.5 m²/l depending on the type and preparation of the surface
Shades
