Acrylic paint for walls and ceilings, washing-resistant, for decorative and protective finishing of interior surfaces. Intended for all types of mineral plasters, concrete, fiber boards, fiberglass wallpaper, embossed wallpaper, and old coatings based on water-borne paints. Recommended for painting walls, ceilings, gypsum board constructions, wallpaper and other surfaces exposed to significant operational loads and periodic washing in wet and dry premises. Approved for use in preschool and school institutions, as well as hospitals and other facilities.

Main characteristics

  • excellent coverage;
  • excellent resistance to washing and wet abrasion (class 2);
  • vapor-permeable, allows the surface to “breathe”;
  • suitable for most surface types;
  • ideal white color, does not yellow over time;
  • quick-drying, easy to apply;
  • environmentally safe material, odourless;
  • economical consumption.

Application

The paint is ready to use; mix thoroughly to a homogeneous state before application. If necessary, dilute with water (max. 10%). For first-time painted surfaces: remove dust and other contaminants. For best results, the surface should be primed with Miks Color Universal Deep-Penetrating Primer. Apply the paint evenly in 2 coats using a brush, roller or spray gun, avoiding runs. Intercoat interval: 2–3 hours. For renovation of previously painted surfaces: remove flaking old coating, clean the surface from dust and dirt. If cracks or damaged areas are present, level the surface using mineral-based fillers, sand, remove dust and prime. Ensure proper ventilation during and after application. Use rubber gloves to protect hands. Tool cleaning: water with detergent.

Drying time

2 hours

Packaging

1.4 kg, 4.2 kg, 7 kg, 14 kg

Consumption

4–6 m²/kg per coat depending on the surface type

Consumption calculator

Colors

white (tinting possible)